Brother MFC-9325CW Guia de Configuração descarregar pdf (Página 35)

Macintosh

Wireless Network

Windows

Macintosh

h The wizard will search for wireless networks

available from your machine. Choose the SSID

that you wrote down for your network in

step 18-a on page 28, and then click Next.

i If your network is not configured for

Authentication and Encryption, the following

screen will appear. To continue configuration,

click OK and go to k.

Enter the

Network Key

you wrote down in

step 18-a

on page 28 and then enter the key

again in

Confirm Network Key

, then click

k Click Next. The settings will be sent to your

machine.

l Disconnect the USB cable between the

computer and the machine.

m Click Next to continue to install MFL-Pro Suite.

To install MFL-Pro Suite, continue to

step 21-d on page 42.

Now go to

page 42

Note

• If the list is blank, check that the access point

has power and is broadcasting the SSID, and

then see if the machine and the access point

are within range for wireless communication.

Then, click Refresh.

• If your access point is set to not broadcast the

SSID you can manually add it by clicking the

Advanced button. Follow the on-screen

instructions for entering the Name (SSID), and

then click Next.

Note

• The settings will remain unchanged if you click

Cancel.

• If you want to manually enter the IP address

settings of your machine, click Change IP

Address and enter the necessary IP address

settings for your network.

• If the wireless setup failure screen appears,

click Retry.

Wireless setup is now complete. A four

level indicator at the right of your

machine's LCD will show the wireless

signal strength of your access

point/router.

1 2 ... 30 31 32 33 34 35 36 37 38 39 40 ... 46 47

Comentários a estes Manuais

Sem comentários

Brother MFC-9325CW Guia de Configuração Página 35

Comentários a estes Manuais

Manuais e produtos relacionados com Pontos de acesso WLAN Brother MFC-9325CW